Contact Us

  • Phone: (+86) 400-111-0563
  • Email: sales@wnmmotor.com

Products

HMRS Magnetic Control Soft Starter

  • Product Classification: Drive Control
  • Product Classification: Soft Starter
  • Voltage Level: 3-15KV, 50Hz/60Hz
  • Power Range: ≤30000KW

HTSS high-voltage solid-state soft starter

  • Product Classification: Drive Control
  • Product Classification: Soft Starter
  • Voltage level: 3-15KV, 50Hz/60Hz
    Power range: ≤20000KW

JXQ(D) Series AC Motor for Storage Battery

  • Power: 0.75～100kW
  • Voltage: 22～500V
  • Working system: S2, S1
  • Insulation level: F

JXQ(D) Series AC motor for Storage Battery

Ideal for the electric forklift, electric vehicle, electric bus or oil pump and such equipment which is driven by battery.

ND Series High Slip Induction Motor Special For oil pump

Applications:

Typical applications include operations where continuous or frequent duty is required. Class F insulated, 1.15 service factor, suitable for the oil pump unit.

Features:

Cast iron frames, IP55 protection, high slip, steep mechanical performance, energy conservation, large margin of safety in temperature rise, low noise, small vibration, high safety and reliability in service and etc.
One power motor voltage: 230/460V OR 230/460/796V
Three power motor voltage: 460V OR 230V OR 796V

NE Series High-Efficiency and High-Torque Induction Motors

Applications:
Typical applications include operations where continuous or frequent duty is required. Class F insulated, 1.15 service factor.
Features:
Cast iron frames, IP55 protection, double lip seal keeps moisture and contamination. Over size bearing, conduit box fully gasket and ground lug in conduit box. Stainless steel nameplate. C&D face kits available.

NEP Series Premium- Efficiency Three-phase Induction Motor

Applications:
Typical applications include operations where continuous or frequent duty is required. Constant torque operation is 10:1, Variable torque operation is from zero to base speed. Premium-efficiency motors are designed to conserve energy over extended time period. Class F insulated, 1.15 service factor.
Features:
Low-lose electrical grade lamination steel. Cast iron frames, IP55 protection, double lip seal keeps moisture and contamination. Over size bearing, spike resistant magnet wire, conduit box fully gasket and ground lug in conduit box. Stainless steel nameplate. C&D face kits available.

NS series Premium Efficient Stainless Steel Motor

  • 1/4 THRU 30HP
  • NEMA 56C THRU 286TC
  • TEFC C-FACE WITH BASE

NS Series Stainless Steel Premium- efficiency Washdown Duty Motors

  • Inverter Duty Rated:  3:1CT & 5:1VT
  • Service Factor:  1.15
  • Design:  “B” or “C”
  • Protection Degree:  IP55
  • Enclosure:  TEFC
  • VPI process applied for best electrical performance
  • C-Face with or without feet
  • Class “F” insulation with Class “B” rise
  • PTC140 thermistors standard for 180 frame and up
  • Continuous duty – Washdown duty
  • Sealed bearings
  • Squirrel cage rotor
  • 300 series stainless steel motor construction
  • 12-Gauge puddle welded base on footed motors
  • Anti-corrosion coating applied
  • DE and NDE drain holes every 90°
  • F1 assembly
  • CSA-US certified and CE marked

SRM Series Switched Reluctance Motor

  • Frame size: H63~315
  • Power: 0.12~200kW
  • Speed range: 50~6000r/min
  • Number of motor phases: Three-phase

TYCP Series Premium-Efficiency Three Phase Variable Frequency Permanent Magnet Synchronous Motor

  • Frame size: 80 ~ 355
  • Power: 0.55 ~ 375 kW
  • Duty type: S1
  • Cooling method: IC411 (Note: For motors ≥55 kW and 3000 rpm, the cooling method is IC416)
  • Energy efficiency rating: Level 1 according to China’s GB30253-2013 standard