Get A Quick Requests Now
For technical consultations, solutions, and other inquiries regarding our products, please fill out the form below and click the “Submit” button. We will contact you as soon as possible.
Contact Us
-
Phone: (+86) 400-111-0563
-
Email: sales@wnmmotor.com
JM/JP Close Coupled Pump electric motor
- Inverter Duty Rated: 20:1VT
- Service Factor: up to 1.2
- Design: “B” or “A”
- Protection Degree: IP55
- Enclosure: TEFC
- VPI process applied for best electrical performance
- High lock rotor torque
- Dual rated for 190/380V 50 Hz
- Oversized bearings on both ends
- Mechanically locked on shaft
- Class “F” insulation with Class “B” rise
- Rigid cast iron frame
- Steel fan guard
- F1 mounting position
- Drain plugs
- Designed for horizontal and vertical application
- CSA-US certified, DOE approved and CE marked
ND Series High Slip Induction Motor Special For oil pump
Applications:
Typical applications include operations where continuous or frequent duty is required. Class F insulated, 1.15 service factor, suitable for the oil pump unit.
Features:
Cast iron frames, IP55 protection, high slip, steep mechanical performance, energy conservation, large margin of safety in temperature rise, low noise, small vibration, high safety and reliability in service and etc.
One power motor voltage: 230/460V OR 230/460/796V
Three power motor voltage: 460V OR 230V OR 796V
NE Series High-Efficiency and High-Torque Induction Motors
Applications:
Typical applications include operations where continuous or frequent duty is required. Class F insulated, 1.15 service factor.
Features:
Cast iron frames, IP55 protection, double lip seal keeps moisture and contamination. Over size bearing, conduit box fully gasket and ground lug in conduit box. Stainless steel nameplate. C&D face kits available.
NEP Series Premium- Efficiency Three-phase Induction Motor
Applications:
Typical applications include operations where continuous or frequent duty is required. Constant torque operation is 10:1, Variable torque operation is from zero to base speed. Premium-efficiency motors are designed to conserve energy over extended time period. Class F insulated, 1.15 service factor.
Features:
Low-lose electrical grade lamination steel. Cast iron frames, IP55 protection, double lip seal keeps moisture and contamination. Over size bearing, spike resistant magnet wire, conduit box fully gasket and ground lug in conduit box. Stainless steel nameplate. C&D face kits available.
NS Series Stainless Steel Premium- efficiency Washdown Duty Motors
- Inverter Duty Rated: 3:1CT & 5:1VT
- Service Factor: 1.15
- Design: “B” or “C”
- Protection Degree: IP55
- Enclosure: TEFC
- VPI process applied for best electrical performance
- C-Face with or without feet
- Class “F” insulation with Class “B” rise
- PTC140 thermistors standard for 180 frame and up
- Continuous duty – Washdown duty
- Sealed bearings
- Squirrel cage rotor
- 300 series stainless steel motor construction
- 12-Gauge puddle welded base on footed motors
- Anti-corrosion coating applied
- DE and NDE drain holes every 90°
- F1 assembly
- CSA-US certified and CE marked
Vertial Hollow Shaft Motors
- Class F Insulation, Class B Rise at Full Load
- 1.15 Service Factor (Sine Wave Power)
- Maximum 40°C Ambient, 3300 Feet Altitude
- The Weather Protected Type 1 (WP1)
- 230/460 Volt Motors Suitable For 230 Volt Part Winding Start
380-415 Volt Suitable For Wye-Delta Start- NEMA Premium Efficient Design
- NRR=Non-Reverse Ratchet